“Discover streamlined operation with our Simplified Operating Guidelines for the EM7100 5-Part Auto Hematology Analyzer. This concise guide ensures efficient usage, providing clear instructions for users of all levels. Maximize your workflow and achieve accurate results effortlessly with these easy-to-follow steps.”
Power On
- Blank Count Confirmation: After powering on, the machine will verify if the blank count is qualified: WBC≤0.3, RBC≤0.03, HGB≤1, PLT≤10. The instrument will automatically perform this process upon each power-on cycle. Alternatively, you can initiate the blank count by pressing the “Blank Count” button on the sample analysis interface.
- Sample Testing Requirement: Sample testing can proceed only if the blank counts are qualified. In the event of blank count failure, you can execute the “cleaning” or “strong cleaning” procedure via the service interface to clean the pipeline.
Power Off
- Press the “Shutdown” icon located in the lower-left corner of the screen. Select “Shutdown” and press “Confirm” to initiate the shutdown process. Follow the on-screen instructions to use “Concentrated Cleaning Solution” for instrument maintenance.
Notice
- Pipeline and Temperature Check: Ensure correct and smooth connections of reagents and waste liquid pipelines, and maintain an ambient temperature between 18°C and 30°C during instrument operation.
- Sample Handling Precautions: When using the “pre-dilution” mode for sample measurement, use specialized dust-free paper to wipe blood collection tubes. Avoid using ordinary paper towels to prevent dust or paper fibers from contaminating the sample and causing blockage in the counting hole or pipeline.
